MSEP

Description

Technical Specifications

Two-post crimping die for big linked terminals rolled over a reel to be unrolled « left to right », with material thickness above 1.5 mm., wire section up to 75 mm². Terminal pitch not binding.Continuous crimping height adjusting system. Pneumatic « side-feed » feeding system. All the wearing parts can be replaced without removing the applicator from the press. Can be fitted to any crimping press having a crimping height (measured from the die mounting plate to the press coupling when at Bottom Dead Center) of 212mm (see Mecal Press P104). It is supplied with a complete technical documentation containing all the information needed to safely use and correctly maintain the equipment. Upon request, a capability study (including a picture of a sectioned crimped terminal)) can be performed. Cycle counter non available.

ID	MSEP S
CRIMPING HEIGHT	212mm (8.35")
STROKE	50mm (1.968")
TERMINAL PITCH	not binding
TERMINAL THICKNESS	> 1,5mm (> 0,059")
WIRE SECTION	max 75mm²
FEEDING SYSTEM	air pressure 5/6 Bar
WEIGHT	17,0Kg (37,4lb)
DIMENSION mm	W450xH210xD157
DIMENSION (")	17.7"x8.26"x5.9"

Files:

MSE & MSC - Manual
Manuale di istruzioni operative comune a tutti modelli di stampo della serie MSE e MSC.

2013-01-08 Italian 2.26 MB 12627